Wind Resistance, Waterproof New Zealand Quality Standard
Chinese Natural Stone Coated Metal Roof Tiles 0.35-0.55mm thick
Stone coated steel roof tile is made from galvalume steel and then coated with stone chips and attached to the steel with an acrylic film. The result is a more durable roof that still retains the aesthetic advantages of high end roofing such as classical or shingle tile. Stone coated steel roof is considered by many to be the most durable and long lasting of all metal roofs, which are also energy efficient and extremely environmentally friendly.
What’s the Stone Coated Metal Tile ?
Colored stone metal tiles are a new type of advanced roofing material produced using high-tech, with aluminum zinc coated steel plates as substrates, water-based acrylic esters as adhesives, sintered colored sand as surface layer, and highly weather resistant acrylic resin as the outermost layer (equivalent to paint). Due to its beauty, lightweight, durability, and environmental friendliness, it has become the mainstream product of international roofing materials in recent years, and is used in high-end buildings in all over the world.
Composition of stone coated steel roofing tiles
Acrylic glazing layer -To provide a sami-gloss finish ,enhance bonding strength of the gravels and prevent rainwater permeating the lower layer
Colored stone layer -To protect tile from ultraviolet rays ,reduce rain noise and improve decorative effect
Acrylic adhensive layer -To adhere stone gravels to the Galvalume steel sheet and protect the sheet
Protective layer -To protect Galvalume coating .enhance the corrosion resistance and adhesion
Aluminum -zinc coating (Galvalume coating)layer -To save energy and prolong the service life of products as a result of high heat -reflective
rate and corrosion resistance of the coating
Steel sheet layer -High strength cold -roll steel sheet
Aluminum -zinc coating (Galvalume coating)layer -To save energy and prolong the service life of products as a result of high heat -reflective
rate and corrosion resistance of the coating
Protective layer -To protect Galvalume coating .enhance the corrosion resistance and adhesion
Q: Could I install the stone coated roof tile on the 0 degrees roof?A: The stone coated roof tile should install the roof which has 20 degrees roof pitch. If the roof pitch is below 20 degrees, it will be easy to leak.
Q: What kind of roof is suitable for installing stone coated roof tile?
A: Both concrete roofs and wooden roofs could install the stone coated roof tile, but it must install the roof batten before installing the roof tile, except interlock tile.
Q: Is necessary to install the roof batten before installing roof tile?
A: Yes, it must install the roof batten before installing roof tile, except Interlock tile.Because we need to fix the roof tile on the roof batten when installment.
Q: How many years of warranty?
A: The warranty of Sangobuild stone coated roof tile could be 50 years.
Characteristics
Product size | 1340mm*420mm | Thickness | 0.35-0.45mm |
Effective area | 1290mm*370mm | Materials | Aluminum-zinc steel plate, colord stone chips |
Coverage area | 0.48m² | Packing | Packed on Pallet |
Number of pavements | 2.08 pcs/m² | Application | Residential, Commercial construction roof |
Product weight | 2.8kg/pc | Life time | 50 years warranty Stone Coated Steel Roofing Sheet |
TYPE | Model No. DK801 | |
Bond Tile / Classic Tile | Base Metal Thickness | 0.30-0.70mm |
Aluzinc Metal Coating | AZ30-AZ150 g/㎡ | |
Tile Size | 1340mm*420mm | |
Effective Size | 1290mm*370mm | |
Coverage Area | 0.477 ㎡ | |
Tiles / SQM | 2.1 pcs | |
CONTACT US AT ANY TIME